Smart Coffee Maker
Introduction
Overview
The atomi Smart Coffee Maker lets you brew your next cup of coffee from your phone anytime, anywhere! Set weekly schedules, turn your Smart Coffee Maker on and off automatically, and much more.
Inside the box you'll find
Cleaning your Smart Coffee Maker before first use
Make sure your first cup of coffee is as good as it can be by cleaning your Smart Coffee Maker before its first use. Just follow these simple steps:
1. Wash the carafe, carafe lid and the filter basket in a mixture of mild detergent and water. Rinse each throughly.
2. Run a brew cycle with water only, without adding coffee and coffee filter.
3. When brewing is complete, turn your Smart Coffee Maker off, discard the water in the carafe and rinse the carafe, lid and filter basket.
Before you begin
1. Know your Wi-Fi network and password
2. Make sure your mobile device is running iOS® 8 or higher or Android™ 4.1× or higher
3. Make sure you’re connected to a 2.4GHz Wi-Fi network (atomi Smart can’t connect to 5GHz networks).
Connecting Your Device
Step 1: Download App
Download the atomi smart app from the App Store or Google Play and create an account. If you already have the app installed, please make sure to check for any updates as they will improve your experience with the atomi smart app.
Step 2: Plug In
Plug your atomi Smart Coffee Maker into any standard outlet.
Step 3: Add Device
1. Confirm that the Wi-Fi button and/or clock are flashing rapidly. If not, press and hold the Wi-Fi button for 10 seconds or unplug and plug the device again.
2. Select “Add Device” or click (+) at the top right corner of the devices screen.
3. Choose “Smart Coffee Maker” from the device list and press ‘Continue’.
Step 4: Connecting to Wi-Fi
1. Enter your Wi-Fi network and password. Press ‘Confirm’.
2. Press ‘Go to Connect’. On your phone’s Wi-Fi screen, select ‘atomi-smart-xxxx’
3. Once it connects, return to the atomi smart app.
4. Your device is now connected.
For iOS: After connecting to the atomi-smart-xxxx, return to the app by pressing ‘atomi smart’ on the top left part of the screen, or by switching back to the atomi smart window
For Android: After connecting to the atomi-smart-xxxx, some devices may display a message informing that you are “Connected without internet”. Please ignore this message and return to the app by pressing the back button on the bottom navigation bar (Do not press the back button on the top left part of the screen as this will bring you bag to the ‘Settings’ page instead of the atomi smart app)
IMPORTANT: If you cannot see the ‘atomi-smart-xxxx’, press and hold the Wi-Fi button again for another 10 seconds and refresh your Wi-Fi list. The ‘atomi-smart-xxxx’ network should appear after a few seconds.
NOTE: If you still cannot see the atomi-smart-xxxx on your list, you may have an older model of our smart product that will require you to press and hold the Wi-Fi button another time until it starts blinking slowly.
Controlling your Smart Coffee Maker
General
Brew ON/OFF – Start brewing and pause brew.
Regular – Brew in regular coffee mode
Strong – Brew in strong coffee mode
Schedule – Set a brewing schedule
Clock – Adjust and set the time
Schedule
Mode – Set the schedule to turn On or Off the device.
Regular/Strong – Enables Regular or Strong mode for scheduled brewing.
Time – Set desired time of the day to start brewing.
Repeat – Select the days of the week that this schedule should repeat.
Press Ok to activate your schedule. Make sure that the green switch at the top right is ON.
Clock
Synchronize your phone’s clock to the Coffee Maker
Measuring your Coffee
For best results, use a level tablespoon for ground coffee measurement. Make sure you use medium grind coffee for a perfect brew.
Adding Water and Ground Coffee:
1 – Open the top lid of the Smart Coffee Maker.
2 – Place a 10-12 cup paper basket-style filter or the included reusable filter into the removable filter basket.
Note: If using paper filters, it is important that the sides of the filter fit flush against the side of the filter basket. If filter collapse occurs, dampen the filter before placing in the filter basket. Add the desired amount of coffee and gently shake to level the coffee.
3 – Fill the water reservoir with cold, fresh water to the desired capacity (1 cup equals 5 ounces). For easy and accurate filling, the water markings on the water reservoir show the amount of water needed to make the corresponding desired number of cups. Do not fill past the “12 cup MAX line” or water will flow out of the Smart Coffee Maker.
Note: The amount of coffee brewed will always be slightly less than the amount of water poured in the water reservoir. This is due to the absorption of water by the coffee grounds.
Using your Smart Coffee Maker without the atomi smart app
1 – After completing the steps in the Adding Water and Ground Coffee section and with the carafe and the filter basket securely in place, turn the Smart Coffee Maker on by pressing the POWER button once. The POWER button light will turn on to signal that the Smart Coffee Maker is on and brewing.
Note: Brew can be stopped by pressing the POWER button a second time.
2 – After the used coffee grounds have cooled, carefully remove the filter basket and discard them.
Note: The brew basket drawer is hot after brewing. Always allow the Smart Coffee Maker to cool down before cleaning.
3 – Make sure the Glass Coffee Carafe is empty and in place before starting to brew coffee.
4 – Be sure to turn your Smart Coffee Maker off when no longer using it.
*Wi-Fi button should be disabled to use TIMER and STRONG features. Make sure to turn Wi-Fi button back ON to control it with the atomi smart app.
Change Set Time
1 – Make sure that the Wi-Fi button is disabled.
2 – Hold down the MINS/HOUR button until “00:00” is blinking on the display.
3 – Set current minutes by pressing the MINS/HOUR button.
4 – Press TIMER button to switch to hours.
5 – Once “00:00″ is blinking, set current hour by pressing the MINS/HOUR button.
6 – Hold down the POWER button to select and save.
Cleaning and Maintaining your Smart Coffee Maker
Daily Cleaning – Always unplug the Smart Coffee Maker and allow to cool before cleaning.
- Remove and wash the filter basket, permanent filter, carafe and carafe lid in a solution of hot water and mild liquid soap.
- Never use abrasive cleansers, steel wool pads or other abrasive materials.
- DO NOT put carafe and lid in the dishwasher.
CAUTION: Never immerse the Smart Coffee Maker itself in water, in any other liquid or place in the dishwasher.
1 – Fill the carafe with a solution of equal parts water and vinegar and let the solution stand in the carafe for approximately 20 minutes.
2. Discard the solution, then wash and rinse the carafe. Do not use harsh abrasive cleaners that may scratch the carafe.
FAQ & Troubleshooting
Make sure your atomi smart device is plugged in and the Wi-Fi light (or clock) is blinking. If not, unplug your atomi smart device and plug it back in to reboot. If you still cannot see the ‘atomi-smart-xxxx’, press and hold the Wi-Fi button for 10 seconds. Note: For older devices, you may be required to press and hold the Wi-Fi button again for another 10 seconds. The atomi-smart-XXXX should appear on your network list after a few seconds.
Use your smart phone to confirm that you have at least two Wi-Fi bars in the vicinity of your atomi smart device. If not, move your atomi smart device closer to your router. (The list will refresh every 10 seconds).
Make sure you entered the correct WiFi password during the WiFi setup. Check if there are problems with your internet connection. If the WiFi signal is too weak, reset your WiFi router and try again.
Refresh the device list.
Force quit and re-launch the atomi smart app.
Press and hold the Wi-Fi butt on for 10 seconds.
Wi-Fi networks come in a lot of shapes and sizes with many quirks of their own. It doesn’t mean your atomi smart device is malfunctioning.
If problems persist, please try these steps, in this order:
1. Force quit and re-launch the atomi smart app. Check to see if this fixes the issue.
2. Unplug your atomi smart device and plug it back in. Check to see if this fixes the issue.
3. Unplug your router and plug it back in. Check to see if this fixes the issue.
4. Delete and reinstall the atomi smart app. Check to see if this fixes the issue.
The Smart Coffee Maker is unplugged. Plug the Smart Coffee Maker back into the wall outlet.
Yes, the atomi Smart Coffee Maker works with Alexa and Google Assistant.
1. The Smart Coffee Maker is unplugged; plug the Smart Coffee Maker back into the wall outlet.
2. There’s a power outage; wait for power to be restored.
3. The filter basket is not properly inserted; insert filter basket correctly.
4. Carafe is not placed all the way on the warming plate; place carafe correctly on warming plate.
There are no coffee grounds in the filter basket; add the desired amount of coffee to the filter.
The filter is not properly placed in the basket. Seat the filter properly within the filter basket.
The atomi Smart Coffee Maker user guide is available here
Still have questions?
Create a ticket on our Support page. Our team is available to help, Monday through Friday, 9am to 5pm (EST)
