Support - Smart Wall Light (Oval)

Introduction

Overview

Beautifully and intelligently designed, the Atomi Smart Wall Light is easy to install and can be controlled remotely from your phone. It’s more than a traditional wall light. In addition to the main LED light, it has a tunable White/RGB mood-light band that can be tuned to over 16 million different colors.

Before you begin

1. Know your Wi‑Fi network and password.
2. Make sure your mobile device is running iOS® 8 or higher or Android™ 4.1 or higher.
3. Make sure you’re connected to a 2.4 GHz Wi‑Fi network (Atomi Smart can’t connect to 5 GHz networks).

Installation

Step 1: Turn off the circuit breaker.

Find your light’s control in your circuit breaker and turn it off. Then make sure the power is off by flipping your switch a few times.

Step 2: Unscrew the mounting bracket from the wall light using the included Allen key.

Step 3: Remove the mounting bracket from the wall light.

Step 4: Align and install the mounting bracket to your existing junction box.

Step 5: Connect the corresponding wires using the wire nuts.

Step 6: Install the wall light onto the mounting bracket.

Step 7: Apply sealant to the sides and top of the light fixture to the wall. *DO NOT seal the bottom side of the backplate to allow moisture to drain.

Step 8: Turn on your switch’s power from the circuit breaker and confirm that the wall light powers on (solid white or flashing).

Connecting Your Device

Step 1: Download App

Download the Atomi Smart app from the App Store or Google Play and create an account. If you already have the app installed, check for updates to improve your experience.

Step 2: Adding Your Device

1. Confirm that the wall light is flashing white. If not, press and hold the “Power” button on the back of the light.
2. Once it’s flashing, open the Atomi Smart app and select “Add Device” or tap (+) at the top right.
3. Press “Connect device” on the banner. If no popup appears, select the device from the list (Add Manually).
4. Follow the on‑screen instructions.

Step 3: Connecting to Wi‑Fi

1. Enter your home Wi‑Fi network (2.4 GHz only) and password.
2. Press “Continue” to complete the connection.

Controlling your Smart Wall Light

Power

ON/OFF – Press “Power” to turn your Smart Wall Light on or off.

White Mode

Brightness – Adjust the light intensity.

Color Mode

• Color Wheel – Broad spectrum of colors to create the perfect ambiance.
• Color Swatches – Save favorites (press & hold to edit/remove).
• Slider 1 – Adjust brightness.
• Slider 2 – Adjust saturation.

Power-on behavior (Do Not Disturb)

Disabled: Light will always turn ON after a power outage or when the physical switch is turned on.
Enabled: If the light was OFF in the app, it stays off after power is restored.
To turn it on again with the wall switch:
– Switch OFF and wait a few seconds
– Switch ON and wait 2 s
– Switch OFF and wait 2 s
– Switch ON

Scenes

Select curated color scenes based on your mood.

Animated Scene Presets

• Soft – Fades in and out between two colors.
• Colorful – Slow cycle through preset colors.
• Dazzling – Fast cycle through preset colors.
• Gorgeous – Gradual fade between colors.

* You can edit any scene by pressing the “Edit/Sync light” button.

Scheduling

• Time – Select when the schedule runs.
• Repeat – Choose days of the week.
• Note – Add a label.
• Power – Turn the light on or off.

Hint: Create a group to schedule multiple wall lights together.

More about creating schedules. Use smart automations for advanced routines: Click here.

Setting automations for Sunset/Sunrise

You can automate lights based on local sunset/sunrise using:

Method 1: Atomi Smart app

1. In the app home screen, tap “Smart Scenes.”
2. Select “Automation” and tap “+.”
3. Choose “Climate” → “Sunset/Sunrise.”
4. Enter your city and select “Sunset” (add offset as needed).
5. Tap “Continue.”
6. Under “Execute Device Action,” select your wall light or group (groups).
7. Choose “Power” (On/Off) and set brightness/color.
8. Tap “Continue,” review, then “Save.”

Method 2: Alexa app

1. Open Alexa → “More” → “Routines.”
2. Tap “+” and name the routine.
3. Under “When this happens,” choose “Schedule” → Sunrise/Sunset.
4. Set location, offset, and days → “Next.”
5. Add action → “Smart Home” → select your wall light/group → “Power” (On/Off) → “Next” → “Save.”

Method 3: Google Home app

1. Open Google Home → “Routines” → “+.”
2. Under “Add starter,” choose “Sunrise/sunset.”
3. Set location, offset, and days → “Done.”
4. Add action → “Adjust Home devices” → expand “Adjust lights, plugs, and more.”
5. Set device action (e.g., turn on wall lights) → “Done.”
6. Add voice starter (required, not used) → “Save.”

Creating Groups to control multiple lights together

1. Ensure all Smart Wall Lights are online and powered ON.
2. Press the “Edit” button (pencil icon) at the top right of one light’s screen.
3. Tap “Create Group,” select devices, then “Save.”