Smart Ceiling Fan
Installation Intructions
Overview
Beautifully and intelligently designed, the Atomi Smart LED Ceiling Fan is easy to install and can be controlled remotely from your phone. It’s more than a traditional ceiling fan.
Before you begin
1. Know your Wi-Fi network and password. Your fan will not work without being connected to Wi-Fi.
2. Make sure your mobile device is running iOS® 8 or higher or Android™ 4.1× or higher.
3. Make sure you’re connected to a 2.4GHz Wi-Fi network (Atomi Smart can’t connect to 5GHz networks).
4. Once connected to the Atomi Smart app, the remote control must also be paired. Learn more here
Instructions
Pairing the Remote Control
Step 1: Once connected to the app, turn off the wall switch and wait 20-30 seconds.
Step 2. Turn on the wall switch, point the remote control to the ceiling fan, and press and hold the “Fan Reversal” button for 4 seconds. Once the light changes to the warmest white shade, pairing is complete. NOTE: Please complete this step within 30 seconds from the moment the wall switch is turned on. Otherwise, repeat steps 1 and 2.
Note: If you have more than one fan, to avoid interference between fans during the remote pairing process, make sure that only 1 fan is powered on at a time. If you did not see the light change to warm white at step 2, please repeat steps 1 and 2.
Controlling your Smart Ceiling Fan
Light
Light Switch – Turn ON/OFF your Smart Ceiling Fan (Light)
White – Choose warm, neutral, cool or everything in between
Brightness – Control the light brightness 1-100%
Timer – Add a timer to turn ON/OFF the light after a determined period. Press ‘Start’ to activate your timer.
Fan
Fan Switch – Turn ON/OFF your Smart Ceiling Fan (blades)
Speed – Change the fan speed between Low, Medium and High
Timer – Add a timer to turn ON/OFF the fan after a determined period. Press ‘Start’ to activate your timer.
Schedule
The ‘Schedule’ feature allows you to create weekly schedules to turn ON/OFF your fan/light based on your settings.
More
Do Not Disturb
Disabled: Light will always turn ON after a power outage (or when you turn ON your physical light switch)
Enabled: If the light status was OFF (in the app), it will remain OFF after a power outage (or when you turn ON your physical light switch)
In order to turn it on again using your physical light switch, follow the steps below:
– Start with the light switch OFF and wait a few seconds
– Turn ON and wait 2 seconds
– Turn OFF and wait 2 seconds
– Turn ON
Default Light – Select if the light should remember the last settings or be set to a determined brightness / white temperature once it is powered OFF/ON via a physical light switch
Switch Gradient – Select the amount of seconds the light should take to turn ON/OFF (Fade effect)
Scheduling
The ‘Schedule’ feature allows you to create weekly schedules to turn ON/OFF your fan/light based on your settings.
You can also use automations to create additional schedules. Click here to learn more.
Creating Groups to control multiple fans together
The Atomi Smart app lets you group devices to control multiple ceiling fans simultaneously.
1. Make sure that all of your Smart Ceiling Fans are online and powered ON
2. Press the ‘Edit’ button (3 dots) at the top right corner of one of the Smart Ceiling Fan’s app screen.
3. Press ‘Create Group’ and select the devices you wish to be included. Press ‘Save’. You can now control your fans simultaneously.
FAQ & Troubleshooting
– Make sure that the AAA batteries (not included) are correctly in place.
– Replace the batteries with new ones.
– Make sure the remote is paired to the ceiling fan (if applicable):
Step 1: Once connected to the app, turn off the wall switch and wait 20-30 seconds.
Step 2. Turn on the wall switch, point the remote control to the ceiling fan, and press and hold the “Fan Reversal” button for 4 seconds. Once the light changes to the warmest white shade, pairing is complete. NOTE: Please complete this step within 30 seconds from the moment the wall switch is turned on. Otherwise, repeat steps 1 and 2.
Note: If you have more than one fan, to avoid interference between fans during the remote pairing process, make sure that only 1 fan is powered on at a time. If you did not see the light change to warm white at step 2, please repeat steps 1 and 2.
Diameter (including blades) : 52″
The Atomi Smart Ceiling Fan comes with a regular and angled mounting bracket. It also includes two downrod options for your choice (4″ and 12″).
No, the motor is not reversible.
If you are having issues to install the fan blades, please follow the steps by clicking here
Alternatively, install the blades without using the provided red washers
– Make sure that the circuit breaker power is turned on.
– Make sure that the wires are properly connected.
– Confirm that your wall switch is on.
– Turn off the power from your circuit breaker and check the fan’s wiring for any connection issues.
Confirm that the blades are properly installed.
– Make sure the downrod is locked and secured to the groove inside the mounting bracket.
– Make sure that the mounting screws are firmly screwed in.
– Confirm that the canopy is firmly attached to the mounting bracket.
– Note any warped blades. If even one blade is slightly distorted, it can create an imbalance. Check for warping by standing on a secure ladder and looking down the edge of the blade toward the motor. If there’s any curvature, the blade is considered warped. Repeat this step for every blade. If they do not appear uneven, confirm that the screws that attach the blades are tightened and secure. Warped blades cannot be balanced.
– Use the included balance kit to even out the blade weight distribution. The Balancing Kit user guide is available here
Make sure your Atomi Smart device is powered on and the light is flashing white. If not, reset your device.
Use your smartphone to confirm that you have at least two WiFi bars in the vicinity of your Atomi Smart device. If not, move your Atomi Smart device closer to your router. (The list will refresh every 10 seconds).
Make sure that you have entered the correct WiFi password during the WiFi setup. Check if there are problems with your internet connection. If the WiFi signal is too weak, reset your WiFi router and try again.
– Confirm that your phone is connected to a 2.4GHz WiFi network
– Check whether the router password you entered is correct.
– Confirm that the DHCP service is enabled on your router settings.
– Make sure that your WiFi signal is strong.
– Temporarily disable your 5GHz network.
– If you have a mesh network/router that does not allow you to disable 5GHz, try to move farther away from your router until your phone moves to the 2.4GHz band.
– For more Connection Troubleshooting tips, visit atomismart.com/connection-troubleshooting/
Refresh the device list.
If you replace your router, you will need to reset your devices and add them again to the app.
Turn off the light switch/circuit breaker:
Still have questions?
Create a ticket on our Support page. Our team is available to help, Monday through Friday, 9am to 5pm (EST)
